Page 89 - Lumatic Ltd, Lubrication Equipment And Fluid Handling Products

LUBRICATION
Adaptors, Pipe Fittings & Waste Oil Pumps

Description Images and specifications can be subject to change without notice Part No.
Parallel Cone Seat (M) x Taper (M) Adaptors
1/4" BSPP (M) x 1/4" BSPT (M) Adaptor GE51100
1/4" BSPP (M) x 3/8" BSPT (M) Adaptor GE51101
1/4" BSPP (M) x 1/2" BSPT (M) Adaptor GE51109
3/8" BSPP (M) x 3/8" BSPT (M) Adaptor GE51102
3/8" BSPP (M) x 1/2" BSPT (M) Adaptor GE51103
3/8" BSPP (M) x 1/4" BSPT (M) Adaptor GE51112
1/2" BSPP (M) x 1/2" BSPT (M) Adaptor GE51104
3/4" BSPP (M) x 1/2" BSPT (M) Adaptor GE51105
3/4" BSPP (M) x 3/4" BSPT (M) Adaptor GE51106
3/4" BSPP (M) x 1" BSPT (M) Adaptor GE51107
1" BSPP (M) x 1/2" BSPT (M) Adaptor GE51110
1" BSPP (M) x 3/4" BSPT (M) Adaptor GE51111
1" BSPP (M) x 1" BSPT (M) Adaptor GE51108
Brass Reducing Bushes

1/4" BSPT x 1/8" BSP (F) RB42
3/8" BSPT x 1/8" BSP (F) RB62
3/8" BSPT x 1/4" BSP (F) RB64
1/2" BSPT x 1/4" BSP (F) RB84
1" BSPT x 3/4" BSP (F) RB1612
Miscellaneous Pipe Fittings

1" BSP M&F Elbow Brass ELBMF01
1/2" Y-Strainer OA22325

1/2" Full Bore Ball Valve OA22320
1" Brass Foot Valve with Wire Strainer OAZ1020

Electric Pump Kit 12v DC

For use with waste engine oil, heating oil and diesel fuel only.
Not suitable for use with Water, Gear Oil or Inflammable Liquids
Supplied With: 6mm OD x 1200mm Suction Probe, 1200mm
Outlet Tube, ON/OFF Switch, Cable and Clips.

Technical Data: Max Run Time: 30 Minutes, Maximum Flow Rate
with warm engine oil = 3 Litres per minute. EPKW12
Heavy Duty Waste Oil Stub Pumps, Kits and Accessories
1:1 Ratio Pneumatic Waste Oil Pumps. Viton seals.
Also suitable for Antifreeze and new Oil.

Waste Oil Pump Only. Flow rate 23 litres per minute. Outlet OA32070
connection 1/2” BSPF. Suction inlet thread 1” BSPM with 1/4”
hose tail
Waste Oil Pump Kit. Pump as above. With wall bracket 2 metre OA32125
suction hose. Suction flow controller and air inlet regulator
High Delivery Waste Oil Pump Only. Flow rate 40 litres per minute. OA32170
Outlet connection 3/4” BSPF. Suction inlet thread 1” BSPM with
1/4” hose tail
Wall bracket for both stub pumps above OA32200
H.D. Suction Hose Assemblies. Supplied with two hose tail clamps,
one 1” BSPF end and one 1“ BSPM to 3/4” BSPM adaptor
One metre suction hose assembly OA22272/K
Two metre suction hose assembly OA22271/K
Spare Hose Tail 1 ” to 1” BSPF GE51200
1/4
Female Part Quick Release Coupler 3/4” BSPF OA32126
Male Part Quick Release Coupler 3/4” BSPF OA32127
Issue 21 MATO GmbH & Co. KG www.lumatic.co.uk 89