Page 24 - Lumatic Ltd, Lubrication Equipment And Fluid Handling Products

LUBRICATION
Grease Gun Couplers and Lubrication Accessories

Description Images and specifications can be subject to change without notice Part No.
Snap-On Rigid Extension
Precision Hydraulic Coupler, 10” Steel Tube and Snap-On
Adaptor (Handy to put an instant extra length to the grease
line). 54 2092

Snap-On 90 Degree Angle Fitting
Precision Hydraulic Coupler, Elbow and Snap-On Adaptor
(Enables easier access to some grease nipples). 54 2093

Snap-On Convertor to Hook-On Grease Nipples
Standard Slide-On Connector with Knuckle Joint, and M-M
Connector to Snap-On Adaptor (Easy conversion from standard
hydraulic grease nipples to hook-on type). 54 2094

Hydraulic Coupler with 90 Degree Angle Fitting
Precision Hydraulic Coupler with 90 Degree Elbow. To fit
grease nipples in confined spaces. 54 2095

Snap-On Flexible Extension
Precision Hydraulic Coupler, 9” Flexible Hose and Snap on
Adaptor. (Provides the facility for connecting a flexible 54 2048
extension hose and connector to rigid tube of a grease gun).

High Pressure Nylon Hoses

Multiple braid, h.p. nylon hose diameter 9mm. Burst 1.000 bar
pressure 1,000 bar (14,450 psi), hex. end fittings for safe
connection to grease gun. 14.450 psi
Thread 1/8” BSPT
9” (230mm) RF9/N

12” (300mm) RF12/N
12” (500mm) RF20/N
Heavy Duty Polymer (Rubber) Hoses
Burst pressure 1,000 bar (14,450 psi).
Thread 1/8” BSPT, diameter 10mm. 1.000 bar
9” (230mm) RF9VS 14.450 psi

12” (300mm) RF12VS
20” (500mm) RF20VS
24” (600mm) RF24VS
High Pressure Rubber Hoses
Burst pressure 1,650 bar (23,900 psi).
Thread 1/8” BSPT, diameter 12.5mm. 1.650 bar
9” (230mm) RF9 23.900 psi

12” (300mm) RF12
20” (500mm) RF20
40” (1,000mm) RF40

Important Safety Advice:

Never point parts which are under high pressure in the direction of persons or animals. Our Quality Lubrication
Equipment can reach hydraulic pressure rates of up to 1.000 bar (14.450 psi). We strongly recommend the use of
our High Pressure Rubber Hose Assemblies (Double Steel Wire Reinforced) with a burst pressure of 1.650 bar
(23,800 psi). Do not forcibly bend or twist hoses: minimum bend radius is 50mm. Before use, check hoses for signs
of damage or leakage. Both nylon and rubber hoses are subject to the effects of ageing, so replace hoses that are
more than 3 years old or if they are showing signs of fatigue or wear. Never use pliers or pipe grips in the area of
the end fitting, use only spanners or wrenches of the correct size on the hexagonal end fittings.
General advice: Use original MATO accessories to avoid unnecessary risks or injuries!

24 MATO GmbH & Co. KG www.lumatic.co.uk Issue 21